TB-9-2320-387-35-4
SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
TECHNICAL BULLETIN; INSTALLATION INSTRUCTIONS
OCTOBER 2006
TB-9-2320-387-35-4 - Page 38 of 109
5-22
TB 9-2320-387-35-4
8-16.
Remove paint from four mounting holes (51) on integrated rack (7). Apply antisieze compound as
required.
8-17.
Remove paint from four mounting holes (50) on MT-6352/VRC mounting base (49). Apply antisieze
compound as required.
NOTE
Two lockwashers and nuts are used on driver’s side screws only.
8-18.
Mount MT-6352/VRC mounting base (49) and amp guard (53) on integrated rack (7) with two
screws (46), four lockwashers (47), two nuts (52). Secure mount MT-6352/VRC mounting base (49)
on integrated rack (7) with two capscrews (48) and two lockwashers (47).
8-19.
Place warning decal (54) on amp guard (53).
Figure 5-30.
7
51
52
47
53
46
48
50
49
46. CAPSCREW – B1821BH031F125N – QTY. 2
47. LOCKWASHER – MS45904-72 – QTY. 6
48. CAPSCREW – B1821BH031F100N – QTY. 2
49. MOUNTING BASE, MT-6352/VRC – A3013367-1 – QTY. 1
52. NUT – 9418892 – QTY. 2
53. AMP GUARD – 872842-1 – QTY. 1
54. DECAL – 861868-2 – QTY. 1
53
54
47
Back to Top
