TB-9-2320-387-35-4
SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
TECHNICAL BULLETIN; INSTALLATION INSTRUCTIONS
OCTOBER 2006
TB-9-2320-387-35-4 - Page 34 of 109
5-18
TB 9-2320-387-35-4
7-19.
Position integrated rack (6) on rack support (1).
7-20.
Install integrated rack (6) on rack support (1) using five capscrews (27), lockwashers (28), and
washers (29), and one capscrew (30), lockwasher (28), and washer (29).
Figure 5-25.
29
27
28
1
27. CAPSCREW – B1821BH025C088N – QTY. 5
28. LOCKWASHER – MS35338-44 – QTY. 6
29. WASHER – MS27183-10 – QTY. 6
30. CAPSCREW – B1821BH025C063N – QTY. 1
7-21.
Fabricate ground strap (35) from 8-in. length of braided wire and two terminal lugs.
NOTE
Remove paint from vicinity of integrated rack mounting hole
before performing step 7-22. Apply antiseize compound as
required.
7-22.
Attach integrated rack (6) to dash panel (34) using two capscrews (31), lockwashers (32),
washers (33), and ground strap (35).
Figure 5-26.
6
31
31
32
32
33
33
31. CAPSCREW – B1821BH025C100N – QTY. 2
32. LOCKWASHER – MS35338-44 – QTY. 2
33. WASHER – 2436161 – QTY. 2
35. GROUND STRAP
• BRAIDED WIRE – AA59569F30T0375 – QTY. A/R
• TERMINAL LUG – MS20659-141 – QTY. 2
6
30
28
29
34
35
~
Back to Top
