TB-9-2320-387-35-4
SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
TECHNICAL BULLETIN; INSTALLATION INSTRUCTIONS
OCTOBER 2006
TB-9-2320-387-35-4 - Page 28 of 109
5-12
TB 9-2320-387-35-4
6-16.
Secure three 24V fusewire assemblies (24) and one 12V fusewire assembly (7) to B-beam (21) with
four self-tapping screws (29).
NOTE
For models equipped with power stud, perform step 6-17.
Otherwise, proceed to step 6-18.
6-17.
Secure 24V terminal board power wire terminal lug (27) to power stud (37) with lockwasher (31)
and existing nut (36).
6-18.
Secure 24V terminal board power wire terminal lug (27) to terminal board (35) with lockwasher (31)
and existing nut (36).
6-19.
Install decal (34) on B-beam (21).
6-20.
If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-387-24.)
6-21.
Install batteries. (Refer to TM 9-2320-387-24.)
Figure 5-16.
34
21
29
27
35
31
36
7
27
37
31
36
29. SELF-TAPPING SCREW – 12342499-2 – QTY. 4
31. LOCKWASHER – MS35338-48 – QTY. 1
34. DECAL – 12339060 – QTY. 1
24
~
Back to Top
