TB-9-2350-369-20-1
M113A3 FOV CARRIERS, M113A2 FOV CARRIERS, M548A1/A3 CARRIERS AND OSV/MBT VEHICLEs
TECHNICAL BULLETIN; INSTRUCTIONS TO CONVERT T130E1 TRACK TO T150F TRACK USING KIT 57K4269
FEBRUARY 2007
TB-9-2350-369-20-1 - Page 24 of 40
TB 9-2350-369-20-1
MODIFICATION PROCEDURES/SEQUENCING (continued)
0002 00
ASSEMBLY - Continued
(1)
Place two track stowage brackets (12474841) on vehicle.
Secure with four flat washers (MS27183-
18) and screws (B1821BH050C150N) all except the M981 and M901A1.
For the M981 and
M901A1, use four screws (B1821BH050C350N).
(2)
Install two track shoes (12474844-1) on two brackets and secure with four square flat washers
(12474863), flat washers (MS27183-18), and screws (B1821BH050C125N).
FINAL INSPECTION
Final Inspection for T150F Track.
1. Adjust
track tension (see your -10).
2. Verify ALL end connector bolts have been secured and torqued to 400-430 lb-ft (543-583 N m).
3. If final inspection is complete and correct, perform FOLLOW-THROUGH STEPS.
FOLLOW-THROUGH STEPS
1
Unblock vehicle (see your -10).
2. Road test vehicle to check that track is installed correctly (see your -20).
0002 00-12
Back to Top
