TB 9-2350-369-20-1
MODIFICATION PROCEDURES/SEQUENCING (continued)
0002 00
ASSEMBLY – Continued
(3)
Unblock vehicle (see your -10).
(4)
Have helper drive vehicle forward or reverse until track assembly positions on sprockets.
(5)
Have helper drive vehicle forward or reverse until track assembly is over idler wheels.
(6)
Hold track in position using crowbar. Hook track fixture to end connectors on either side of break.
Install outside track fixture first, then install fixture to the inside of the track assembly.
(7)
Tighten two track fixtures evenly until ends of track are close enough to install end connectors.