TB-9-2510-251-24
TECHNICAL BULLETIN
INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)
JULY 2005
TB-9-2510-251-24 - Page 153 of 212
TB 9-2510-251-24
CHAPTER 4
INSTALLATION – ADD ON ARMOR (AOA) KIT
4-1
SCOPE
These procedures provide a method of installing the armor kit.
4-2
TOOLS REQUIRED
TOOLS REQUIRED
NSN NUMBERS
Scissor Table
Pry Bar
Hammer
Grinder
Saw Reciprocating
Chisel
1⁄2” Drill
Screwdriver Set
3/8” Impact Wrench
Punch Set
1⁄4” Eight-Point Socket
(Removal of Door Hinges)
7/16” Socket
1⁄2” Socket
Part of
9/16” Socket
Socket Set 3/8” Drive
3/4” Socket
7/16” Open End Wrench
Part of
1⁄2” Open End Wrench
Wrench Set
9/16” Open End Wrench
Combination
3⁄4” Open End Wrench
3/8” Ratchet
3” x 3/8” Drive Extension
6” x 3/8” Drive Extension
and
Blade Kit Hole Saw
13/32” Drill Bit
9/32” Drill Bit
1/2 “ Drill Bit
5133 -00-227-9672
4-1
Back to Top
