TB-9-2510-251-24

TECHNICAL BULLETIN

INSTALLATION, REMOVAL, AND PARTS INSTRUCTIONS FOR ADD ON ARMOR (AOA) AND ASSOCIATED COMPONENTS FOR HMMWV FAMILY OF VEHICLES (FOVs)

JULY 2005

TB-9-2510-251-24 - Page 157 of 212

TB 9-2510-251-24

7.

Tighten all remaining bolts.

NOTE

Some

models

will

use

5/16” – 20 and 5 ½” bolts

to accommodate the roll

bar.

8.

Place front striker into

existing holes on the B-Pillar.

Insert 5/16” – 20 and

1 ½” bolts and 5/16” washers

through striker plate and

B-Pillar and loosely tighten

5/16” locking nuts.

Adjust

striker to door latch as

needed.

Tighten down

mounting hardware.

4-5