TM-1-1500-344-23-2
AIRCRAFT VOLUME II
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
APRIL 2009
TM-1-1500-344-23-2 - Page 154 of 240
8-10
NAVAIR 01-1A-509-2
TM 1-1500-344-23-2
15 April 2009
Compound, Corrosion Preventative
4
Water-Displacing
MIL-PRF-81309
Compound, Corrosion Preventive
6
MIL-PRF-16173
(1) Apply
water
displacing
CPC
(MIL-PRF-81309 Type II) followed by long term CPC
(MIL-PRF-16173 Grade 4). The part shall then be
overwrapped with barrier material (MIL-PRF-131 Class
1) and sealed with tape (SAE AMS-T-22085 Type II).
(2)
Wrap part in VCI film, MIL-PRF-22019, or
VCI paper, MIL-PRF-3420, and seal with tape, SAE
AMS-T-22085.
c. Completely painted parts need no other special
protective measures, except in marine or high humidity
environments. In these cases, the part shall be
overwrapped with barrier paper (MIL-PRF-131 Class 1)
and sealed with tape (SAE AMS-T-22085 Type II).
d. Depending upon the length of time in storage,
reapplication of protection may be required.
(1) Refer to Table 8-1 for time limitation
information on CPCs.
(2)
Replace torn or damaged VCI film or paper.
Intact VCI film or paper has a storage limit of one year.
Solvent, Degreasing
13
MIL-PRF-680
Cleaner, Non-Aqueous,
15
Low VOC, HAP Free,
MIL-PRF-32295
e. Prior to returning the part or assembly to service,
remove CPCs with degreasing solvent (MIL-PRF-680
Type II or III) or non-aqueous cleaner (MIL-PRF-32295
Type I) as required. Reapply the appropriate aircraft
lubricant to areas requiring lubrication. CPCs shall not
be used for lubrication in lieu of the lubricant specified
for use on a particular part or assembly.
Change 1 - 31 March 2010
Back to Top
