TM-1-1500-344-23-4
CONSUMABLE MATERIALS AND EQUIPMENT FOR AIRCRAFT AND AVIONICS VOLUME IV
TECHNICAL MANUAL; CLEANING AND CORROSION CONTROL
SEPTEMBER 2013
TM-1-1500-344-23-4 - Page 79 of 92
3-21
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
01 September 2013
Table 3-6. Sealing Equipment (Cont.)
Nomenclature
Specifcation/
Part No.
National Stock
Number
Unit
of
Issue
Intended Use
Usable On
AC
AV
DISPENSER ACCESSORIES (CONT.)
Plastic Nozzles with 1/4"
NPT male threaded end,
Disposable
Standard nozzles
220538 (No. 252)
220540 (No. 254)
233495 (No. 255)
220542 (No. 410)
220543 (No. 410)
227613 (No. 415)
220544 (No. 420)
220548 (No. 430)
220549 (No. 430)
220550 (No. 440)
220553 (No. 620)
220554 (No. 620)
220555 (No. 640)
220556 (No. 640)
220551 (No. 640)
224494 (No. 650)
220557 (No. 820)
220558 (No. 840)
220559 (No. 840)
220560 (No. 840)
220606 (No. 8690)
220561 (No. 1002)
220563 (No. 1004)
220565 (No. 1010)
Fillet nozzles
232499 (No. 425)
232500 (No. 426)
232501 (No. 427)
232502 (No. 428)
232590 (No. 429)
Ribbon nozzles
220568 (No. 8607)
220569 (No. 8608)
220570 (No. 8610)
220572 (No. 8613)
220574 (No. 8615)
220577 (No. 8616)
220581 (No. 8630)
220582 (No. 8630-9)
220585 (No. 8642)
220586 (No. 8643)
220587 (No. 8645)
220588 (No. 8646)
220589 (No. 8648)
Extension nozzle
220552 (No. 600E)
Floorboard nozzle
231674
Funnel nozzle
231718 (1")
231348 (2")
Nozzle adapter
229306
Edge fll nozzle
234164 (No. 44)
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
Open Purchase
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
See Volume II, Figure 7-3, for
dimensions and drawing oF nozzles.
45 degree angle.
45 degree angle.
45 degree angle.
30 degree angle.
45 degree angle.
45 degree angle with 1/16" orifce.
45 degree bend with 1/8" orifce.
9" vent duct nozzle.
Applying sealant fllets over lap
joints.
2 3/16" For windshield fllet.
6 3/8" extension.
1/4 NPT female thread.
Nozzle gives a slightly rounded
edge fll and has a 0.40" thick ±ange
to guide along panel edge.
X
Back to Top
