TM-1-4940-355-12-P
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM) P/N 50154-001, MOUNTED ON HIGH MOBILITY MULTI PURPOSE WHEELED VEHICLE (HMMWV) HEAVY (HVY) MODEL M1097A2
TECHNICAL MANUAL; OPERATOR’S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 2003
TM-1-4940-355-12-P - Page 89 of 164
TM 1-4940-355-12&P
0022 00
SHOP EQUIPMENT CONTACT MAINTENANCE (SECM)
REPLACING REAR MOUNTING BAR
INITIAL SETUP
Tools And Special Tools:
Tool Kit Acft. Maint., B01 (Table 2, WP 0025 00)
Materials/Parts:
Mounting Bar P/N 50154-799 (Figure 4, Item 18, WP
0027 00)
Personnel Required:
One MOS 67 Series or MOS 68 Series
References:
Repair Parts and Special Tools List, WP 0027
TM 9-2320-280-10, TRUCK, UTILITY: HEAVY
VARIANT, 4X4, M1097 (2320-01-346-9317) (EIC:
BBM); M1097A1
Equipment Conditions:
Side boxes and Overhead Rack removed from
HMMWV, WP 0012 00
Replacing Rear Mounting Bar
1.
Remove or unfasten rear cab curtain from container.
2.
Remove 3 mounting bolts (1), 3 lock washers (2) and 3 flat washers (3).
3.
Remove 2 mounting bolts (4), 3 lock washers (5) and 3 flat washers (6) and spacer (7). (Figure 1)
9
3
2
1
5
6
7
4
8
MS019483
Figure 1.
Rear Mounting Bar Replacement
0022 00-1
Back to Top
