TM-10-4930-247-13-P
HEMTT TANKER AIRCRAFT REFUELING SYSTEM MODEL HTARS100
TECHNICAL MANUAL; OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
FEBRUARY 1994
TM-10-4930-247-13-P - Page 93 of 309
TM 10-4930-247-13&P
3-4.
COMPONENT REPLACEMENT - cont.
b.
Installation.
Refer to figure 3-2.
(1)
Position replacement component (7) in fuel system (8).
(2)
Disconnect dust cap (6) from valved coupling (4).
(3)
Disconnect dust cap (5) from valved coupling (2).
(4)
Connect dust cap (5) to dust cap (6).
(5)
Connect valved coupling (3) to valved coupling (4).
(6)
Set control handle (3) on valved coupling (4) to OPEN.
(7)
Set control handle (1) on valved coupling (2) to OPEN.
(8)
Repeat steps (2) through (7) for other end of replacement component (7).
(9)
Startup fuel system (para 2-12f) and check for leaks at replaced component (8).
3-14
Back to Top
