TM-10-5411-233-13-P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
SEPTEMBER 2002
TM-10-5411-233-13-P - Page 193 of 356
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
0022 00
UNIT MAINTENANCE
0022 00-1
SIDE WALL REPAIR OF PUNCTURE THROUGH ONE SKIN AND CORE
THIS SECTION COVERS
:
Repair
INITIAL SETUP:
Personnel Required:
One
Maintenance Level -
Unit
Materials/Parts
Methylethylketone (WP 0055, Table 1, Item 3)
Tools and Special Tools
Sandpaper (WP 0055, Table 1, Item 8)
General Mechanic Tool Kit (WP 0041, Table 2,
Item 1)
Wiping Rags (WP 0055, Table 1, Item 6)
Light, Incandescent Adjustable With Tripod Base
(WP 0041, Table 2, Item 2)
Masking tape (WP 0055, Table 1, Item 5)
Goggles,Industrial (WP 0041, Table 2, Item 3)
Alodine, Brush (WP 0055, Table 1, Item 12)
Drill,Electric,Portable (WP 0041, Table 2, Item 4)
Adhesive, Two Part Epoxy (WP 0055, Table 1,
Item 9)
Drill Set, Twist: W/25 Components And Metal Box,
Numbered Series (WP 0041, Table 2, Item 8)
Cartridges, 1/10 Gallon Empty (WP 0055, Table 1,
Item 10)
Drill Set, Twist (WP 0041, Table 2, Item 5)
Nozzle, 2 1/2 In Long With 1/8 In Orifice
(WP
0055, Table 1, Item 11)
Gloves,Chemical And Oil Protective (WP 0041,
Table 2, Item 6)
Sheet, Aluminum, .032 Inch Thick X 12 Inches X
12 Inches (WP 0055, Table 1, Item 15)
Gun, Caulking (WP 0041, Table 2, Item 7)
Rivet, Dome, HD, 1/8 Inch Dia. (WP 0055, Table
1, Item 13)
Riveter, Hand Blind with 1/8 inch nosepiece (WP
0041, Table 2, Item 9)
Sticks, Mixing (WP 0055, Table 1, Item 14)
Router, Electric, Portable (WP 0041, Table 2, Item
10)
Core, 1.00 (OR 1.50) Inch Thick X 12 Inches X 12
Inches (WP 0055, Table 1, Item 16 OR 17)*
* core material thickness depends on thickness of side wall being repaired
REPAIR
NOTE
The following procedure covers repair of panel puncture through one
skin with core damage (damaged area does not exceed 100 square
inches [645 square cm]).
NOTE
Openings may be oval, circular, square or rectangular with rounded
corners.
Back to Top
