TM-10-5411-233-13-P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

SEPTEMBER 2002

TM-10-5411-233-13-P - Page 211 of 356

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER

0026 00

UNIT MAINTENANCE

0026 00-1

THREADED INSERT REPLACEMENT

THIS SECTION COVERS

:

Replace

INITIAL SETUP:

Personnel Required:

One

Maintenance Level -

Unit

Materials/Parts

Methylethylketone (WP 0055, Table 1, Item 3)

Tools and Special Tools

Sandpaper (WP 0055, Table 1, Item 8)

General Mechanic Tool Kit (WP 0041, Table 2,

Item 1)

Wiping Rags (WP 0055, Table 1, Item 6)

Light, Incandescent Adjustable With Tripod Base

(WP 0041, Table 2, Item 2)

Masking tape (WP 0055, Table 1, Item 5)

Goggles,Industrial (WP 0041, Table 2, Item 3)

Alodine, Brush (WP 0055, Table 1, Item 12)

Drill,Electric,Portable (WP 0041, Table 2, Item 4)

Adhesive, Two Part Epoxy (WP 0055, Table 1,

Item 9)

Drill Set, Twist (WP 0041, Table 2, Item 5)

Cartridges, 1/10 Gallon, Empty (WP 0055, Table

1, Item 10)

Gloves,Chemical And Oil Protective (WP 0041,

Table 2, Item 6)

Nozzle, 2 1/2 In Long With 1/8 In Orifice

(WP

0055, Table 1, Item 11)

Gun, Caulking (WP 0041, Table 2, Item 7)

Sheet, Aluminum, .032 Inch Thick X 12 Inches X

12 Inches (WP 0055, Table 1, Item 15)

Header, Hand-Operated (WP 0041, Table 2, Item

11 OR 13)

Sticks, Mixing (WP 0055, Table 1, Item 14)

Gloves, white, cloth (WP 0055, Table 1, Item 19)

REPLACING NON-POTTED (NON ADHESIVE ENCAPSULATED) INSERTS

NOTE

Inserts installed in extrusions are not potted. Knock out insert and

replace with same type.

Depending on insert size, select a drill bit in size range listed below:

Insert Thread Size

Drill Size Range Inches (mm)

10-32

19/64 (7.6)

1/4-28

25/64 (9.9)

5/16-24

17/32 (13.5)

3/8-24

17/32 (13.5)