TM 3-1040-279-12&P
4-17 AIR HOSE ASSEMBLY.
This task covers repair of Air Hose Assembly.
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Automotive Tool Kit
Before performing any maintenance procedures
SC 5180-90-CL-N-26
be sure circuit breaker CB1 is in OFF posi-
tion.
Before performing any maintenance procedures
Equipment Condition
on air lines be sure to relieve system of pres-
Air hose assembly removed from
sure by opening drain valve on compressor
equipment container (P. 4-83).
tank.
REPAIR
1.
2.
3.
4.
5.
Cut hydraulic hose (1) at straight adapter (2) and remove adapter.
Cut hydraulic hose (1) at straight adapter (3) and remove adapter.
Replace adapters as required.
Fabricate new hose (Fig. G-2, App G).
Install straight adapters (2) and (3) in hydraulic hose.
4-90
Change 2