TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

TM-3-1040-279-12-P - Page 160 of 389

TM 3-1040-279-12&P

4-23 TERMINAL BRACKET ASSEMBLY.

This task covers replacement of:

a. Terminal Board TB12 (P. 4-96)

b. FUEL, AIR, ENG, or OIL Switch (P. 4-97)

INITIAL SETUP

General Safety Instructions

Before performing any maintenance proce-

Tools

dures be sure circuit breaker CB1 is in OFF

General Mechanic’s Automotive Tool Kit

position.

SC 5180-90-CL-N26

Before performing any maintenance procedures

on air lines be sure to relieve system of pres-

Materials

sure through control valve on pressure tank.

Sealing compound (Item 11A, App E)

Fog oil is very slippery, wipe up all spills

immediately to prevent injury to personnel.

a. Terminal Board TB12

REMOVAL

1. Remove terminal bracket assembly from equipment container (P. 4-74).

2. Remove four screws (l), washers (2), and nuts (3), and remove terminal board (4).

INSTALLATION

1. Position terminal board (4) and secure using four screws (1), washers (2), and nuts (3).

2. Install terminal bracket assembly in equipment container (P. 4-74).

4-96

Change 2