TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

TM-3-1040-279-12-P - Page 222 of 389

TM 3-1040-279-12&P

4-36 AIR COMPRESSOR ASSEMBLY (CONT).

b. Air Compressor.

REMOVAL

1.

2.

3.

4.

5.

Remove electrical connections (1) from POS and NEG terminals on air compressor (2).

Remove motor cover screw (3) securing capacitor assembly (4) and loop clamp (5) to air

compressor (2).

Disconnect air hose assembly (6) from check valve (7), remove check valve (7) from elbow (8)

and remove elbow (8) from air compressor (2).

Remove two screws (9), washers (10) and nuts (11), and

Remove air compressor (2) from frame assembly (13).

remove two loop clamps (12).

INSTALLATION

1.

2.

3.

4.

Position air compressor (2) on frame assembly (13) and secure with two loop clamps (12), two

screws (9), washers (10) and nuts (11).

Install elbow (8), check valve (7), and air hose assembly (6) on air compressor (2).

Install capacitor assembly (4) and loop clamp (5) on air compressor with motor cover screw (3).

Install electrical connections (1) on POS and NEG terminals of air compressor (2).

4-154

Change 2