TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

  TM-3-1040-279-12-P - Page 229 of 389

TM 3-1040-279-12&P
i. Cable Assembly 2J1.
REMOVAL
1.
2.
3.
Remove electrical connections from terminal block (1).
Remove two screws (2) and washers (3) and remove two loop clamps (4).
Remove four screws (5), washers (6), and nuts (7) and remove cable assembly
assembly (9).
NOTE
Air compressor and relay removed for clarity.
INSTALLATION
(8) from frame
1.
2.
3.
Position cable assembly (8) on frame assembly (9) and secure with four screws (5), washers (6),
and nuts (7).
Secure cable assembly (8) to frame assembly (9) with two loop clamps (4), screws (2) and
washers (3).
Attach electrical connections to terminal board (1), see air compressor assembly wiring (P. 4-166),
Coat terminal board screw threads with sealing compound (Item 11A, App E) before securing
connections.
Change 2
4-161


Back to Top