TM 3-1040-279-12&P
4-40 AIR HOSE ASSEMBLY.
This task covers repair of Hose Assembly.
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Automotive Tool Kit
Before performing any maintenance instruc-
SC 5180-90-CL-N26
tions be sure circuit breaker CB1 is in OFF
position.
Before performing any maintenance proce-
Equipment Condition
dures on air hoses be sure to relieve system
Air hose removed from air compressor assembly
of pressure through control valve on pres-
(P. 4-164).
sure tank.
REPAIR
1.
2.
3.
4.
5.
Cut hydraulic hose (1) at straight adapter (2) and remove adapter.
Cut hydraulic hose (1) at straight adapter (3) and remove adapter.
Replace straight adapters (2) and (3) as required.
Fabricate new hose (Fig. G-11, App G).
Install straight adapters (2) and (3) in hydraulic hose (1).
4-170