TM 3-1040-279-12&P
4-39 AIR HOSE ASSEMBLY.
This task covers repair of Hose Assembly.
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Automotive Tool Kit
Before performing any maintenance instructions
SC 5180-90-CL-N26
be sure circuit breaker CB1 is in OFF position.
Equipment Condition
Before performing any maintenance procedures
Air hose removed from air compressor assembly
on air hoses be sure to relieve system of pres-
(P. 4-162).
sure through control valve on pressure tank.
REPAIR
1.
2.
3.
4.
5.
Cut hydraulic hose (1) at straight adapter (2) and remove adapter.
Cut hydraulic hose (1) at straight adapter (3) and remove adapter.
Replace straight adapters (2) and (3) as required.
Fabricate new hose (Fig. G-10, App G).
Install straight adapters (2) and (3) in hydraulic hose (1).
4-169