TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

TM-3-1040-279-12-P - Page 242 of 389

TM 3-1040-279-12&P

4-42 FOG OIL TANK ASSEMBLY (CONT).

b.

Retaining Straps and

Anchor

Straps.

REMOVAL

NOTE

Removal and installation procedures are the same for all four retaining

straps.

1.

Loosen and remove nut (1), washer (2) and spring (3) securing retaining straps (4) and (5).

2.

Remove two screws (6) and washers (7) securing anchor strap (8) and remove retaining strap (5)

from fog oil tank assembly (9).

INSPECTION

Inspect for cracks, deformities, or damage due to thinning metal.

INSTALLATION

1.

Position anchor strap (8) in retaining strap (5).

2.

Position retaining strap (5) with anchor strap (8) on fog oil tank assembly (9) and secure with two

screws (6) and washers (7).

3.

Install two washers (2), one spring (3), and nut (1) and tighten nut (1) until retaining strap is secure.

4-174

Change 4