TM 3-1040-279-12&P
INSTALLATION
1.
Install retained gasket (4) into bowl assembly (2). Apply a coating of clean fuel to gasket and screw
on bowl assembly (2) with gasket onto new fuel element (1).
CAUTION
DO NOT use tools to tighten filter element to fuel filter/water separator
assembly.
2.
Apply a coating of clean fuel to filter element gasket and ensure filter element (1) and bowl
assembly (2) are filled with clean fuel before proceeding.
3.
Screw on new fuel element (1) with attached bowl assembly (2) to fuel filter/water separator (3)
snugly, by hand only.
CAUTION
Ensure fuel filter and filter bowl is filled with clean fuel before starting the
M54 smoke generator.
Change 4
4-183