TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

TM-3-1040-279-12-P - Page 254 of 389

TM 3-1040-279-12&P

4-47 INSTRUCTION AND IDENTIFICATION PLATES.

This task covers replacement of instruction and identification plates.

INITIAL SETUP

Tools

Materials

General Mechanic’s Automotive Tool Kit

Rags (Item 11, App E)

SC 5180-90-CL-N26

Dry cleaning solvent (Item 4, App E)

REMOVAL

NOTE

The procedures for replacing the instruction and identification plates are the

same on all components of the Smoke Generator Set.

1.

Lift edge of plate (1) with sharp tool.

2.

Pull plate (1) completely off mounting surface.

3.

Thoroughly clean mounting surface with rags (Item 11, App E) and dry cleaning solvent (Item 4, App

E). Surface must be free of oil, grease, dirt, or any foreign matter.

4.

Peel paper from adhesive back of plate.

5.

Mount plate and apply pressure to plate surface.

4-186

Change 4