TM-5-2330-325-13-P
SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-2330-325-13-P - Page 387 of 648
FIELD MAINTENANCE
TOOL BOX REPAIR
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP 0144, Table 1, Item 16)
Gloves, Chemical and Oil Protective
(WP 0144, Table 1, Item 7)
Torch, Cutting
(WP 0144, Table 1, Item 17)
Welder, Arc, Portable
(WP 0144, Table 1, Item 18)
Materials/Parts
Hinge Pin Qty: (3) WP 0125, Figure 28, Item 2
Nut, Self-Locking
Qty: (10) WP 0125, Figure 28, Item 8
Nut, Self-Locking
Materials/Parts (cont.)
Qty: (6) WP 0125, Figure 28, Item 11
Remover, Paint (WP 0143, Table 1, Item 22)
Personnel Required
Two
References
TC 9-237
Equipment Condition
Semitrailer parked on level ground (WP 0005)
WARNING
•
The tool box lid is secured by two pneumatic openers. Caution should be used
when opening the tool box. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
•
The tool box weighs 250 lb (113.39 kg). The tool box replacement requires a lifting
device rated at a minimum of 500 lb (226 kg) and two personnel. Failure to comply
may result in death or injury to personnel. Seek medical attention in the event of
an injury.
TM 5-2330-325-13&P
0085
0085-1
Back to Top
