TM-5-2330-378-14-P
SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1999
TM-5-2330-378-14-P - Page 13 of 524
TM 9-2330-378-14&P
TEXTAND ILLUSTRATIONS(continued).
3.
Maintenance
procedures
are to be performed
in the sequence given in the text and illustrations.
4.
Illustration
callouts are numbered
in the order that the parts they identify are removed in the procedure.
For
example:
Remove screw (1), lockwasher(2), washer (3), and bracket (4) from crankcase (5).
5.
Be sure to read the entire paragraph before beginning a maintenance
procedure.
Also, read the general
information
in Chapterl
before beginning a procedure
WARNINGS, CAUTIONS, AND NOTES.
1
Throughout
this manual you will see WARNING,
CAUTION, and NOTE headings.
There are good reasons for
every one of these notices.
WARNING
A warning
is used to alert the
user to hazardous
operating
and maintenance
procedures,
practices,
or conditions
that could result In injury or death.
Warnings
must be strictly observed.
CAUTION
A caution is used to alertthe userto hazardous operating and maintenance
procedures,
practices,
orconditions
that could result in damage to, ordestruction
of, equipment
or
mission effectiveness.
Cautions
must be strictly observed.
NOTE
A note highlights
an essential
operating
or maintenance
procedure,
condition,
or
statement.
2.
Warnings
and cautions appear immediately
preceding the step to which they pertain. It is important to read
and thoroughly
understand thewarnings
and/orcautions
before beginning maintenance.
3.
Notes may precede or follow the steps to which they pertain, depending on what makes the most sense.
vii/(viii
blank)
Back to Top
