TM-5-2330-378-14-P
SEMITRAILER, LOWBED: 40 TON CONSTRUCTION EQUIPMENT TRANSPORTER M870 AND M870A1
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1999
TM-5-2330-378-14-P - Page 3 of 524
TM 5-2230-378-14&P
FORINFORMATIONONFIRSTAID,REFERTO FM
21-11.
WARNING
DRYCLEANING
SOLVENT
•
Drycleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;
use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and
DO NOT breathe vapors.
Keep away f rom heat or f lame. Never smoke when using
drycleaning
solvent.
Failure to follow this warning may result in injury or death to
personnel.
•
If personnel become dizzy while using drycleaning solvent, immediately get fresh
air and medical help. If solvent contacts
skin or clothes, flush with cold water.
If
solvent
contacts
eyes, immediately
flush
them with water and get immediate
medical attention.
•
When drycleaning
solvent Is used, notify the local medical authority
(preventive
medicine)
and environmental
coordinator
concerning
medical
surveillance,
respiratory
protection,
and disposal
requirements.
WARNING
AIR UNDER PRESSURE
@Li
•
Wear protective goggles when opening air reservoir drain cock. Avoid contact with
the air stream.
Failure to follow this warning may result in injury or death to
personnel.
•
Compressed air used for cleaning or drying purposes, or for clearing restrictions,
should
never exceed 30 psi (207 kPa). Wear protective
clothing
(gogglestshield,
gloves, etc.) and use caution,
to avoid injury to personnel.
•
When opening
drain cock, turn face away from exhaust air blast, to prevent eye
injury.
•
Wear eye protection when working with air under pressure. Failure to do so could
result in eye injury.
•
Particles
blown by compressed
air are hazardous.
Failure to wear protective
goggles
when drying metal parts could cause serious eye injury.
a
Back to Top
