TM-5-2350-262-20-1

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 1 OF 3

TM-5-2350-262-20-1 - Page 474 of 776

TM 5-2350-262-20-1

Change 3

4-125

Note

Although the Bilge Pump is considered Not Mission

Essential and will no longer be supported with

spare and repair parts, this task contains

maintenance procedures For Your Information

Only.

See TB 43-0001-62-7 (dated Oct 98) for

Instructions to Isolate and Disconnect a Non-

Functional Bilge Pump.

A

Remove lamp lens (1) and bulb (2) from bilge

pump “ON” lap receptacle (3).

B

Remove screw (4), and ground lead (5) from

clamp (6) and rear of panel (7).

Disconnect Power

lead (8) from connector (9).

C

Remove nut (10) and receptacle (3) from panel

(7).

REMOVAL

A

Install bilge pump “ON” lamp receptacle (3) on

panel (7) with nut (10).

B

Coat connector (9) with silicone compound, and

connect connector (9) to power lead (8).

Connect

ground lead (5) to clamp (6) and rear of panel (7)

with screw (4).

C

Install bulb (2) and lamp lens (1) on receptacle (3).

FOLLOW-ON TASK:

Connect negative battery cables (p 4-84).

INSTALLATION