TM 5-2350-262-20-1
Change 3
4-247
6
8
7
3
4
5
6
6
INSPECTION
Inspect bracket (1) for bends, broken welds,
and corrosion.
Repair (p 2-26) or replace
bracket (1) if damaged.
A
Inspect pile tape (9) and hook tape (10) for
damage.
Replace if damaged.
B
Inspect air duct hose (7) for holes, dry rot,
and damage.
Replace if damaged.
C
Inspect cap (8) for holes, dry rot and damage.
Replace if damaged.
D
INSTALLATION
Install new filter (2) and bracket (1) on driver’s
compartment wall.
A
Pre-assemble cap (8), and air duct hose (7)
on duct (5) with two clamps (6).
B
Install duct (5) on driver’s compartment wall
using four washer (4) and screws (3) .
C
Install air duct hose (7) on driver’s ventilation
fan adapter (11) with remaining clamp (6) .
D
11
FOLLOW-ON TASKS:
Retract ejector (TM 5-2350-262-10)