TM 5-2350-262-20-2
Change 3
4-894.11
A
Remove cotter pin (1), clevis pin (2), and shift
control cable (3) from lever (4).
B
Remove two nuts (5) from clamp (6) on cable
mount (7).
Move shift control cable (3) away
from winch.
C
Remove two screws (8), lockwashers (9),
washers (10), and shift control assembly (11)
from driver’s compartment wall.
Discard
lockwashers (9).
D
Remove access cover (12)
from shift control
assembly (16)
E
Place shift control lever (13) in N (neutral), and
loosen jamnut (14) and setscrew (15).
F
Turn shift control assembly (16)
counterclockwise and remove from shift control
cable (3).
REMOVAL