TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 535 of 670

TM 5-2350-262-20-2

4-894.12

Change 3

INSTALLATION

A

Install shift control cable (1) on vehicle by routing

cable through hole (2) in floor of driver’s

compartment, along left side of winch (3), and

across back of winch (3)

B

Place shift control lever (4) in N (neutral), and

insert end of shift control cable (1) into pin (5) of

shift control assembly (6).

Turn shift control

assembly (6) clockwise until cable (1) is tight.

C

Lock shift control cable (1) in place by tightening

setscrew (7) down on cable groove (8).

Lock

setscrew (7) by tightening jamnut (9).

Install

access cover (10).

D

Install shift control assembly (6) on driver’s

compartment wall with two washers (11),

lockwashers (12), and screws (13).

E

Move shift control cable (1) to installed position

on cable mount (14) and secure with clamp (15)

and two nuts (16).

F

Assemble shift control cable (1) to control lever

(17) and secure with clevis pin (18) and cotter

pin (19).

FOLLOW-ON TASKS:

•

Adjust winch shift control lever (p 4-894.8).

•

Install rear floor plates (p 4-360).

11

6

DRIVER’S

COMPARTMENT

WALL

12

13