TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 178 of 404
DISASSEMBLY - Continued
NOTE
Dozer blade must be removed from apron (WP
0037) before replacing bushings.
13.
Using hammer and drift, drive out two outer bushings (Figure 13, Item 2) and two inner bushings
(Figure
13,
Item
3) from apron (Figure 13, Item 1).
3
2
M0031HBF
2
1
Figure 13.
Inner Bushings from Apron Disassembly.
END OF TASK
REPAIR
1.
Repair apron and dozer assembly by replacing damaged or worn parts and by using general repair methods.
If authorized, weld (TM 9-237) and straighten.
2.
Bond rubber pad (Figure 14, Item 1) to plate (Figure 14, Item 2) with adhesive.
TM 5-2350-377-13&P
0036
0036-12
Back to Top
