REMOVAL - Continued
3.
Support apron hydraulic cylinders (Figure 3, Item 2) with blocks, and remove screw (Figure 3, Item 1), nut
(Figure 3, Item 4), two washers (Figure 3, Item 5), and pin (Figure 3, Item 3) from each side of vehicle.
4
5
M0021HBF
1
2
3
Figure 3.
Hydraulic Cylinders Removal.
4.
Disconnect headlight intermediate wiring harness cannon plug (Figure 4, Item 2) from apron wiring harness
receptacle (Figure 4, Item 1) on left side of vehicle.
M0022HBF
1
2
Figure 4.
Intermediate Headlight Wiring Harness Removal.
TM 5-2350-377-13&P
0036
0036-4