TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 161 of 404
FIELD MAINTENANCE
HEADLIGHT MOUNT REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Stand, Vehicle (WP
0071, Table 1, Item 6)
Wrench, Torque, Dial, 1/4 in. Drive (30 in-lb)
(WP
0071, Table 1, Item 14)
Materials/Parts
Washer, Lock (WP
0055, Figure 10, Item 6)
Qty:
3
Personnel Required
Construction Equipment Repairer, 91L
Equipment Condition
Front of vehicle blocked (TM 5-2350-262-20)
Negative battery cables disconnected
(TM 5-2350-262-20)
Hydraulic pressure relieved (TM 5-2350-262-20)
Headlight incandescent lamp removed (WP
0033)
REMOVAL
NOTE
Use this task to replace left or right side headlight mount. Right side headlight mount is shown.
1.
Remove five screws (Figure 1, Item 5) from headlight cover (Figure 1, Item 6). Remove cover.
2.
Remove three screws (Figure 1, Item 1) and lockwashers (Figure 1, Item 2) from body (Figure 1, Item 3).
Discard lockwashers.
3.
Pull out headlight mount (Figure 1, Item 4) from body (Figure 1, Item 3).
5
M0015HBF
3
4
6
1
2
Figure 1.
Headlight Mount Removal.
END OF TASK
TM 5-2350-377-13&P
0034
0034-1
Back to Top
