TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012

TM-5-2350-377-13-P - Page 155 of 404

FIELD MAINTENANCE

HEADLIGHT LENS HOLDER AND LIGHT FILTER, LIGHT LENS, AND RUBBER ROUND SEAL REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's: Automotive

(WP

0071, Table 1, Item 7)

Materials/Parts

Adhesive (WP

0070, Table 1, Item 2)

Brush, Acid, Swabbing

(WP

0070, Table 1, Item 4)

Cleaning Compound, Solvent

(WP

0070, Table 1, Item 6)

Gloves, Chemical and Oil Protective

(WP

0070, Table 1, Item 11)

Goggles, Industrial (WP

0070, Table 1, Item 12)

Rag, Wiping (WP

0070, Table 1, Item 25)

Materials/Parts (cont.)

Rubber Round Seal (Nonmetallic)

(WP

0055, Figure 10, Item 10) Qty:

1

Rubber Round Section

(WP

0055, Figure 10, Item 15) Qty:

1

Personnel Required

Construction Equipment Repairer, 91L

Equipment Condition

Front of vehicle blocked (TM 5-2350-262-20)

Hydraulic pressure relieved (TM 5-2350-262-20)

Negative battery cables disconnected

(TM 5-2350-262-20)

REMOVAL

NOTE

Screws are captive to holder and stay on holder.

1.

Unscrew five screws (Figure 1, Item 3) on holder (Figure 1, Item 2).

2.

Remove holder (Figure 1, Item 2) from body (Figure 1, Item 1). Pull out rubber round seal (Figure 1, Item 4)

from holder (Figure 1, Item 2). Discard rubber round seal.

2

1

M0009HBF

2

3

4

Figure 1.

Headlight Rubber Round Seal Removal.

TM 5-2350-377-13&P

0032

0032-1