TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 159 of 404
FIELD MAINTENANCE
HEADLIGHT INCANDESCENT LAMP REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Stand, Vehicle (WP
0071, Table 1, Item 6)
Personnel Required
Construction Equipment Repairer, 91L
Equipment Condition
Front of vehicle blocked (TM 5-2350-262-20)
Equipment Condition (cont.)
Negative battery cables disconnected
(TM 5-2350-262-20)
Hydraulic pressure relieved (TM 5-2350-262-20)
Headlight lens holder and light filter, light lens, and
rubber round seal removed (WP
0032)
REMOVAL
1.
Remove five screws (Figure 1, Item 5) from headlight cover (Figure 1, Item 1) and remove cover.
2.
Roll front edge of headlight mount (Figure 1, Item 2) toward back of lamp (Figure 1, Item 4).
3.
Pull out lamp (Figure 1, Item 4) from headlight mount (Figure 1, Item 2). Pull off connector plug
(Figure 1, Item 3) from lamp (Figure 1, Item 4).
4
3
M0013HBF
5
1
2
Figure 1.
Headlight Incandescent Lamp Removal.
END OF TASK
TM 5-2350-377-13&P
0033
0033-1
Back to Top
