INSTALLATION
1.
Apply sealant adhesive on new gasket (Figure 2, Item 3) with acid swabbing brush. Position gasket
(Figure 2, Item 3) on support (Figure 2, Item 8).
2.
Feed connector (Figure 2, Item 2) through hole (Figure 2, Item 4) in support (Figure 2, Item 8). Install jam nut
(Figure 2, Item 9) to connector (Figure 2, Item 2).
3.
Position body (Figure 2, Item 1) on support (Figure 2, Item 8). Install three screws (Figure 2, Item 5), new
lockwashers (Figure 2, Item 6), and washers (Figure 2, Item 7) to support (Figure 2, Item 8) and body
(Figure 2, Item 1).
9
M0018HBF
1
2
3
4
8
7
6
5
Figure 2.
Headlight Support Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install left or right headlight assembly (WP
0030).
2.
Connect negative battery cable (TM 5-2350-262-20).
3.
Unblock front of vehicle (TM 5-2350-262-20).
END OF TASK
END OF WORK PACKAGE
TM 5-2350-377-13&P
0035
0035-3/4 blank