TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 147 of 404
FIELD MAINTENANCE
TRACK AND BLADE CONTROL BOX REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Personnel Required
Construction Equipment Repairer, 91L
Equipment Condition
Battery box open (TM 5-2350-262-20)
Negative battery cables disconnected
(TM 5-2350-262-20)
REMOVAL
1.
Remove control box power harness connector (Figure 1, Item 1) from track and blade control box
(Figure 1, Item 2).
2.
Remove manifold harness connector (Figure 1, Item 3) from track and blade control box (Figure 1, Item 2).
3.
Remove two screws (Figure 1, Item 6) and two washers (Figure 1, Item 5) from instrument panel
(Figure 1, Item 4).
4.
Slide track and blade control box (Figure 1, Item 2) upward from behind instrument panel (Figure 1, Item 4).
5
M0001HBF
1
2
3
4
6
5
6
Figure 1.
Track and Blade Control Box Removal.
END OF TASK
TM 5-2350-377-13&P
0029
0029-1
Back to Top
