TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 100 of 335

TM 5-2350-377-14&P

OPERATOR/CREW PMCS

INCLUDING LUBRICATION INSTRUCTIONS

0011 00

0011 00-1

SPECIFIC PMCS PROCEDURES

a. Operator/Crew PMCS is provided in Table 11-1.

Always perform PMCS in the order listed.

Once PMCS procedures

become routine, spotting problems will become much easier.

b. Before performing PMCS, read all the checks required for the applicable interval and prepare all tools needed for the

task.

Have several clean rags (Item 17, WP 0055 00) ready for use.

Perform ALL inspections at the applicable

interval.

c. If any problems are discovered through PMCS, perform the appropriate troubleshooting task found

in WP 0008 00.

If any component or system is not serviceable, or if any service does not correct the problem, notify your supervisor.

d. Explanation of the column headings in Table 11-1 are as follows:

(1)

Item No.

The item number column of your PMCS table is to be used for reference.

When completing DA Form

2404, include the item number for the check/service indicating a fault.

Item numbers also appear in the order

that you must do checks and services for the intervals listed.

(2)

Interval.

This column of your PMCS table tells you when to do a certain check or service.

(3)

Location, Item To Check/Service.

This column of your PMCS table provides the location and the item to be

checked or serviced.

(4)

Procedure.

This column of your PMCS table tells you how to do the required checks and services.

Carefully

follow these instructions.

If you do not have the tools, or if the procedure tells you to, have Unit maintenance

do the work.

(5)

Not Fully Mission Capable If.

This column tells you when and why your equipment cannot be used.