FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
T00109HDC
5
4
3
2
1
Figure 5.
Hydraulic Diagnostic Center (HDC) Control Box.
i.
Port 17R: Repeat previous step for port 17R, but open V5 instead of V11.
j.
Stop engine; relieve hydraulic pressure.
k.
Remove all test equipment and connect hose.
CONDITION/INDICATION
Is transducer T-1 hydraulic pressure at least 3,900 psi (26,891 kPa)?
DECISION
YES - Go to Step (9).
NO - Replace DCV bank (TM 5-2350-262-20). Verify problem is solved.
TM 5-2350-378-23&P
0012
0012-9