REAR OF VEHICLE RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE - Continued
STEP
8.
Check SPRUNG/UNSPRUNG control valve linkage.
a.
Hold measuring device (Figure 4, Item 1) on face of SPRUNG/UNSPRUNG control valve
(Figure 4, Item 3).
b.
Have assistant move SPRUNG/UNSPRUNG lever between SPRUNG and UNSPRUNG modes.
c.
Measure distance that plunger (Figure 4, Item 2) travels as lever is moved.
T01506HDC
3
2
1
Figure 4.
SPRUNG/UNSPRUNG Control Valve Linkage.
d.
Distance of travel should be 9/32 in. (7 mm).
CONDITION/INDICATION
Is linkage adjusted correctly?
DECISION
YES - Go to Step (9).
NO - Go to Step (10).
TM 5-2350-378-23&P
0017
0017-7