TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 198 of 790
TM 5--2350--378--24&P
EJECTOR DOES NOT EXTEND OR RETRACT -- Continued
0012 00
Figure 6. HDC Control Box
LEFT AND RIGHT MAIN RELIEF VALVE PRESSURE CHECK
Reset all HDC solenoid valves by selecting the RESET VALVES button (Figure 6, item 1)
on the HDC control box.
WARNING
S
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result in
severe injury or death to personnel.
S
Do not stand or work in bowl area unless ejector lock is engaged. Do
not stand in bowl to observe roller guide travels. Failure to comply
may result in severe injury or death to personnel.
S
When folding dozer blade, work on blade latches from side of vehicle
only. Do not stand In front of dozer blade while retracting ejector.
Failure to comply may result in severe injury or death to personnel.
Continued on page 0012 00--13.
0012 00--11/12 blank
Back to Top
