TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

  TM-5-2815-241-34-P - Page 119 of 738

TM 5-2815-241-34&P
OIL PAN INSTALLATION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
8. Oil pan (3)
Suction tube with
flange (10), two
screws (12), two
new lockwashers (13),
and new gasket (14),
7. Oil pump (9)
Nut (11)
8. Oil pan (3)
Four screws (4)
9.
Four screws (6),
twenty-eight screws
(15) and twenty-
eight new
lockwashers (16)
a.
Position suction tube with flange and
gasket on oil pan.
b.
Using 1/2-inch drive 9/16-inch socket
and ratchet handle, screw in and
tighten.
Using 1 7/8-inch open-end wrench,
tighten.
Using 1/2-inch drive 1/2-inch socket, 6-
inch extension, and 0 to 150 ft lb (0 to 210
N•m) torque wrench, screw in and torque
evenly 15 to 20 ft lb (20 to 27 N•m).
Using 1/2-inch drive 5/8-inch socket,
6-inch extension, and 0 to 150 ft lb (0 to
210 N•m) torque wrench, screw in and
torque evenly 35 to 40 ft lb (47 to 54 N•m).
TASK ENDS HERE
TA 242395
2-97


Back to Top