TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 213 of 738

TM 5-2815-241-34&P

CYLINDER HEAD - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REPAIR/ASSEMBLY

NOTE

Step 22 is typical for all cylinder head crosshead guide pins tagged for replacement.

22. Cylinder head (3)

Crosshead guide

pin (4)

a.

Using ST-667 or ST-1134 dowel puller

(5), remove crosshead guide pin.

b.

Using arbor press and ST-633 cross-

head guide mandrel, press new cross-

head guide pin into cylinder head to

obtain protrusion (6) of 1.860 to

1.860 inches (47.24 to 47.75 mm).

If new crosshead guide pin will not

fit securely in cylinder head, dis-

card cylinder head.

TA 242464

2-191