TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 225 of 738
TM 5-2815-241-34&P
CYLINDER HEAD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
44.
Cylinder head (1)
Injector sleeve (2)
Position ST-880 expanding roller tool (6)
into injector sleeve.
45.
Injector sleeve (2)
ST-880 expanding
roller tool (6)
Adjust depth of expanding roller tool so
that roller (7) extends 0.5 inch (12.7 mm)
into injector sleeve.
CAUTION
Overrolling of injector sleeve will cause deformation of sleeve into preformed packing
groove.
46.
ST-880 expanding
roller tool (6)
a.
Using 1/2-inch drive 0 to 150 in. lb (0 to
16.9 N•m) torque wrench, tighten roller
(7) until a 75 in. lb maximum torque
reading is reached.
b.
Remove tools from injector sleeve.
TA 242474
2-203
Back to Top
