TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 376 of 738

TM 5-2815-241-34&P

FUEL INJECTOR - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

DISASSEMBLY - CONTINUED

5.

6. Injector (1)

Do not remove orifice plug from inlet groove.

Injector (1)

Insert injector into loading fixture (2).

Body wrench (3)

a.

Install body wrench over flats on injector

and tighten special screw (4), to hold

injector in place.

b.

Using ST-995 retainer wrench (5), 1/2-

inch drive 1 1/4-inch crowsfoot socket,

and hinged handle, loosen, but do not

remove cup retainer.

c.

Loosen special screw (4). Remove tools

from injector and remove injector from

loading fixture.

NOTE

Another method of loosening cup retainer is to use a 1 1/4-inch box-end wrench on

ST-995 retainer wrench and a 1-inch open-end wrench on injector.

TA 242573

2-354