TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 387 of 738

TM 5-2815-241-34&P

FUEL INJECTOR - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

24.

Injector (7)

Place into loading fixture (6).

25. Injector (7)

Body wrench

no. 3375102 (9)

Install over flats on injector, tighten

special screw (10) just enough to hold

injector.

26. Loading fixture (8)

Special screw (10)

Using 3/8-inch drive 0 to 150 in. lb (0 to

17.5 N•m) torque wrench, tighten to 75 in.

lb (8.5 N•m) to aline injector cup and

plunger (4).

27. Injector (7)

Cup retainer (6)

Using ST-995 retainer wrench (11), 1/2-

inch drive 1 1/4-inch crowsfoot socket

(12), and 0 to 175 ft lb (0 to 245 N•m)

torque wrench (13) tighten to 50 ft lb (70

N-m).

28. Loading fixture (8)

Injector (7)

Loosen special screw (10) and remove from

loading fixture.

29.

Injector (7)

Remove all tools from injector.

TA 242583

2-365