TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 417 of 738

TM 5-2815-241-34&P

TURBOCHARGER - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

33.

New bearing

Position new bearing insert over shaft to

insert (7)

flange on bearing.

34.

New preformed

packing (8)

Lubricate new packing with lubricating oil

and install in groove on compressor end of

bearing housing.

35. Seal (9)

Piston ring (10)

Coat seal and piston ring with lubricating oil

and install piston ring on seal.

36. Diffuser plate (11)

Seal (9) and piston

ring (10)

Install seal assembly from inside of diffuser

plate with piston ring towards outside of

diffuser plate.

37.

New seal ring (12)

Lubricate new seal ring with lubricating oil

and install on lip of diffuser plate.

38. Bearing housing

assembly (13)

Diffuser plate

assembly (14)

Coat bearing housing bore with lubricating

oil and place diffuser plate over shaft. Aline

retainer on diffuser plate so that retainer

covers side of bearing flange.

TA 242602

2-395