TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 6 of 738
TM 5-2815-241-34&P
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can
injure personnel and damage equipment. Refer to TM 9-247, Materials Used for
Cleaning, Preserving, Abrading, and Cementing Ordnance Materiel and Related
Materials Including Chemicals.
WARNING
Repair of engine must be performed on engine repair stand (page 2-11). Due to
excessive weight assistance will be needed to prevent injury when lifting heavy parts.
WARNING
When fuel is forced from injector spray holes, keep hands and body away from spray
stream. High-pressure fuel may pierce the skin.
WARNING
Fuel is flammable and can explode. To avoid serious injury or death, keep fuel away
from open fire and keep fire extinguisher within easy reach when working with fuel.
Smoking is prohibited while working with fuel.
WARNING
Heat protective cloth mittens must be worn to prevent serious injury to hands when
handling heated parts.
WARNING
Approximately halfway through the cut, the tool will begin to cut the counterbore ledge.
Be prepared for the added load on the drill when the counterbore is being cut, or
personal injury could result.
WARNING
Extreme care must be taken when releasing springs under pressure. Injury to personnel
could result.
WARNING
Slave piston spring is under tension. Care must be taken when removing retaining ring,
spring retainer, and slave piston spring to prevent injury.
WARNING
Slave piston spring will be under tension when installing. Extreme care must be taken to
prevent injury.
WARNING
Pressure regulator spring is under tension. Maintain pressure on retaining yoke to
prevent injury.
b
Back to Top
