TM-5-3805-254-14-P-1
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)
AUGUST 1980
TM-5-3805-254-14-P-1 - Page 139 of 590
SECTION II OPERATOR CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Truck, Dump, 20 Ton F5070
B-BEFORE
D-DURING
A-AFTER
W-WEEKLY
M-MONTHLY
ITEM
NO.
INTERVAL
ITEM TO BE INSPECTED
PROCEDURE:
CHECK FOR AND HAVE REPAIRED, FILLED OR
EQUIPMENT IS NOT READY/
AVAILABLE IF:
B
D
A
W
M
ADJUSTED AS NEEDED
6
INSTRUMENTS
With engine running, check the gage readings.
Gages should read in
Pressure/temperature gages
normal operating ranges as follows:
within ranges specified.
•
(1)
Engine oil pressure
30-70 PSI
•
(2)
Engine oil temperature
180
°
-225
°
F
•
(3)
Water temperature
165
°
-195
°
F
•
(4)
Air pressure
60 PSI MIN
7
•
V-BELTS
Check all belts for looseness, frayed condition or deterioration.
Belt(s) missing or broken.
8
•
AIR RESEVOR(S)
Drain moisture and sediment.
72
Back to Top
