TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 118 of 894

TRUCK SERVICE MANUAL

BODIES AND CABS

GENERAL

The information contained in this manual section has

been prepared to provide service personnel with a ready

reference to step-by step procedures for repair or

replacement of fiberglass components.

Instructions for making fiberglass repairs to sheet

metal are also covered in this section.

A fiberglass reinforced plastic repair kit (Fig. 1) has

been made available which contains the material needed

to repair either fiberglass or sheet metal components.

This kit may be obtained through regular Service Part

channels.

The mixing directions for the resin mixture and

plastic putty are found on the cans.

CAUTION

:

Do not put mixed material back into cans.