TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 836 of 894

INSTALLATION OF SHIFTER HOUSING

ON CASE:

1. Use light coat of cement and assemble shift cover

gasket (K-1) to auxiliary case.

2. Place both clutch gear collars in neutral position.

3. Check to determine that shifter housing is in neutral

and set shifter housing assembly down into position on

case. Make sure both shift forks are in their proper place

on corresponding shift collars.

4. Secure shifter housing to main case with cap screws

(K-2), lock washers (K-5).

5. Use large screwdriver or small pry bar and check

movement of each shift rod to make sure auxiliary will

shift readily and completely into each gear position.

827